LM6132,LM6134 Texas Instruments TI pdf datasheet download

LM6132,LM6134

Dual and Quad Low Power 10 MHz Rail-to-Rail I/O
Operational Amplifiers

General Description

The LM6132/34 provides new levels of speed vs. power
performance in applications where low voltage supplies or
power limitations previously made compromise necessary.
With only 360 μA/amp supply current, the 10 MHz gainbandwidth
of this device supports new portable applications
where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both
power supply rails, thus eliminating concerns over exceeding
the common-mode voltage range. The rail-to-rail output
swing capability provides the maximum possible dynamic
range at the output. This is particularly important when operating
on low supply voltages. The LM6132/34 can also
drive large capacitive loads without oscillating.
Operating on supplies from 2.7V to over 24V, the LM6132/34
is excellent for a very wide range of applications, from battery
operated systems with large bandwidth requirements to
high speed instrumentation.

Features

(For 5V Supply, Typ Unless Noted)
n Rail-to-Rail input CMVR −0.25V to 5.25V
n Rail-to-Rail output swing 0.01V to 4.99V
n High gain-bandwidth, 10 MHz at 20 kHz
n Slew rate 12 V/μs
n Low supply current 360 μA/Amp
n Wide supply range 2.7V to over 24V
n CMRR 100 dB
n Gain 100 dB with RL = 10k
n PSRR 82 dB

Applications

n Battery operated instrumentation
n Instrumentation Amplifiers
n Portable scanners
n Wireless communications
n Flat panel display driver

Click here to download LM6132,LM6134 Texas Instruments TI pdf datasheet


DatasheetDoc-Texas Instruments TI pdf datasheet download