Friday, October 5, 2012

LM3875 Texas Instruments TI pdf datasheet download


Overture™ Audio Power Amplifier Series
High-Performance 56W Audio Power Amplifier

General Description

The LM3875 is a high-performance audio power amplifier
capable of delivering 56W of continuous average power to
an 8Ω load with 0.1% THD+N from 20Hz to 20kHz.
The performance of the LM3875, utilizing its Self Peak Instantaneous
Temperature (°Ke) (SPiKe™) protection circuitry,
puts it in a class above discrete and hybrid amplifiers
by providing an inherently, dynamically protected Safe Operating
Area (SOA). SPiKe protection means that these
parts are completely safeguarded at the output against overvoltage,
undervoltage, overloads, caused by shorts to the
supplies, thermal runaway, and instantaneous temperature
The LM3875 maintains an excellent signal-to-noise ratio of
greater than 95dB(min) with a typical low noise floor of
2.0μV. It exhibits extremely low THD+N values of 0.06% at
the rated output into the rated load over the audio spectrum,
and provides excellent linearity with an IMD (SMPTE) typical
rating of 0.004%.

n 56W continuous average output power into 8Ω
n 100W instantaneous peak output power capability
n Signal-to-Noise Ratio >95dB (min)
n Output protection from a short to ground or to the
supplies via internal current limiting circuitry
n Output over-voltage protection against transients from
inductive loads
n Supply under-voltage protection, not allowing internal
biasing to occur when |V+| + |V−| ≤ 12V, thus eliminating
turn-on and turn-off transients
n 11 lead TO-220 package
n Wide supply voltage range: |V+| + |V−| = 20V to 84V

n Component or compact stereos
n Self-powered speakers
n Surround-sound amplifiers
n High-end stereo TVs

Click here to download LM3875 Texas Instruments TI pdf datasheet

DatasheetDoc-Texas Instruments TI pdf datasheet download


Post a Comment