Texas Instruments CC2520 pdf datasheet download

CC2520 DATASHEET
2.4 GHZ IEEE 802.15.4/ZIGBEE® RF TRANSCEIVER

APPLICATIONS

• IEEE 802.15.4 systems
• ZigBee® systems
• Industrial monitoring and control
• Home and building automation
• Automatic Meter Reading
• Low-power wireless sensor networks
• Set-top boxes and remote controls
• Consumer electronics
KEY FEATURES
• State-of-the-art selectivity/co-existence
Adjacent channel rejection: 49 dB
Alternate channel rejection: 54 dB
• Excellent link budget (103dB)
400 m Line-of-sight range
• Extended temp range (-40 to +125°C)
• Wide supply range: 1.8 V – 3.8 V
• Extensive IEEE 802.15.4 MAC hardware
support to offload the microcontroller
• AES-128 security module
• CC2420 interface compatibility mode
Low Power
• RX (receiving frame, -50 dBm) 18.5 mA
• TX 33.6 mA @ +5 dBm
• TX 25.8 mA @ 0 dBm
• <1μA in power down
General
• Clock output for single crystal systems
• RoHS compliant 5 x 5 mm QFN28 (RHD)
package

Radio
• IEEE 802.15.4 compliant DSSS baseband
modem with 250 kbps data rate
• Excellent receiver sensitivity (-98 dBm)
• Programmable output power up to +5 dBm
• RF frequency range 2394-2507 MHz
• Suitable for systems targeting compliance
with worldwide radio frequency
regulations: ETSI EN 300 328 and EN
300 440 class 2 (Europe), FCC CFR47 Part
15 (US) and ARIB STD-T66 (Japan)
Microcontroller Support
• Digital RSSI/LQI support
• Automatic clear channel assessment for
CSMA/CA
• Automatic CRC
• 768 bytes RAM for flexible buffering and
security processing
• Fully supported MAC security
• 4 wire SPI
• 6 configurable IO pins
• Interrupt generator
• Frame filtering and processing engine
• Random number generator
Development Tools
• Reference design
• IEEE 802.15.4 MAC software
• ZigBee® stack software
• Fully equipped development kit
• Packet sniffer support in hardware

DESCRIPTION

The CC2520 is TI's second generation ZigBee® /
IEEE 802.15.4 RF transceiver for the 2.4 GHz
unlicensed ISM band. This chip enables industrial
grade applications by offering state-of-the-art
selectivity/co-existence, excellent link budget,
operation up to 125°C and low voltage operation.
In addition, the CC2520 provides extensive
hardware support for frame handling, data
buffering, burst transmissions, data encryption,
data authentication, clear channel assessment,
link quality indication and frame timing
information. These features reduce the load on
the host controller.
In a typical system, the CC2520 will be used
together with a microcontroller and a few
additional passive components.


Click here to download Texas Instruments CC2520 pdf datasheet


DatasheetDoc-All pdf datasheet download